Facebook
Twitter
LinkedIn
Reddit

FLIP INSPECTION TABLE

An air cylinder raises the glass modules and flips it at an angle, allowing operators to inspect for defects.

Product Detail

Additional information

Product Name & Code

FLIP INSPECTION TABLE 

Dimensions

3510mm*2800mm*1980mm (customizable)

Weight

600kgs

Power Supply

1 Phase 3Lines,220V 50Hz (2×1mm²+1×1mm²) copper wire

Installed Power

1.5KW

Average Power

0.2KW

Air Consumption

20L/min

Ambient

-10_60℃ Relative Humidity<90%; Altitude<2500m

Ventilation

None

Cycle time

28S

Control System

SUNIC

Control Board

SUNIC

Transmission Mode

Timing belt transporting modules, located with Sensor

Transporting Speed

15m/min

Maximum Module Size

2500*1350mm

Minimum Module Size

2200*1100mm

Maximum Module Thickness

60mm

Sensor Type

FM18-T015p-cp31p2

Frame type and its Material

Aluminum alloy  MC-8- GA

Belt Type and its Material

Polyurethane belt wire

Flip method

Pneumatic flip

Wuhan Sunic New Energy Technology Co., Ltd. is a wholly-owned subsidiary of the Sunic Group, specializing in the research, development, production, and sales of complete sets of solar energy equipment. We provide comprehensive solutions for solar photovoltaic modules. Currently, the company holds more than 100 patents with a core team of over 200 professionals. We have established over 10 domestic offices and export our products to over 50 countries and regions worldwide. With our dedication to quality and innovation, we serve more than 500 satisfied customers.

 

OUR VISION

1998 – PRESENT

Adhering to the business philosophy of being customer-centric and sharing success with customers, Wuhan Sunic New Energy Technology Co., Ltd. collaborates with customers, suppliers, academic organizations, and associations to continuously innovate and break through in the field of solar energy photovoltaic intelligent manufacturing. We provide customers with the best production solutions and address their concerns. Additionally, our company contributes to promoting the construction of a clean, low-carbon, safe, and efficient modern energy system in China.

 

LEADER IN THE PRODUCTION PROCESS

SPECIALIZING IN PHOTOVOLTAICS SINCE 1998

Arugs offers the finest production and quality control solutions at every stage of the production process. With extensive expertise in the industry, we provide customers with top-notch turnkey solutions, along with comprehensive training, production assistance, consultancy, and support services. Our team consists of highly qualified personnel with years of experience in the photovoltaic sector.”

OUR EXPERIENCE FOR YOUR BENEFIT

ARGUS TAKES YOUR REQUESTS TO HEART WITH A 360 ° SUPPORT SERVICE

PERSONALIZED SERVICE

TECHNICAL SUPPORT

rethinking-solar-project-delivery-1536x1536

We can implement an effective project and customize it according to your choice with a unique design that represents your brand, from strategic consulting to the choice of machines according to your needs, we provide theoretical and practical training, we help you with the certification of the panels and we take care of the installation and start of production. You will just have to keep producing and marketing your customized product.

christina-wocintechchat-com-faEfWCdOKIg-unsplash

The technical support team is available to give our customers security in the appropriate use of the production line. We are here to help you answer any questions about the photovoltaic manufacturing process and make sure you feel safe and informed when working with our production lines. Our machines are all connected to Argus and this allows us to provide a remote support experience.

RAW MATERIAL PROCUREMENT

REMOTE ASSISTANCE

FEED THE ONGOING PRODUCTION

REMOTE ASSISTANCE

image

The start-up phase of a new module manufacturing company can be intensive considering many points of view. Argus, to support the customer in this delicate phase, can take care of the raw material procurement for the installation and startup of the line and can also continue to supply raw material for the ongoing production.

Solar_Project_Finance_Modeling_RVI_1400x788

Argus was born as a manufacturer of photovoltaic modules, so we know the importance of keeping the line running and how expensive production stops are. For this reason we pay particular attention to guaranteeing an efficient and punctual service and to obtain it, an internet connection has been installed in all machines. This on-line connection allows communication between the machines and gives the Argus technicians the possibility to provide rapid and efficient assistance via the internet. Thanks to this connection, the machines are also prepared for a line management supervision system.

MODULES TESTING

CERTIFICATION SUPPORT

OUR EXPERIENCE FOR YOUR MODULES

GUARANTEE A QUALITY PRODUCT

全自动排版机

We enable solar panel manufacturers and laboratories to accurately measure the performance of all types and sizes of PV modules up to 2.6m x 1.4m.
The services that are offered to test the quality of the modules are the following:
– Measurements of the IV curve;
– Electroluminescence test;
– Hi-pot test
– PID testing and recovery procedure;
– Gel content test;
– AOI System (Automatic Optical Inspection);
– Verification of photovoltaic modules in the field.

武汉三工光电楼顶

Argus is able to provide support during the entire certification process, helping the customer to identify the most suitable raw material and performing pre-certification quality tests on the material and on the finished product. In this way, in addition to having a further guarantee of quality, the material also has the requisites required for the certification.

AFTER-SALES SUPPORT

ON-SITE SERVICE ENGINEER

ARGUS STAYS BY YOUR SIDE

IN PERSON IS BETTER

lADPKIJfTsHfL63NC9DND8A_4032_3024

Whether you need additional training, spare parts supply, remote assistance, warranty extension or to upgrade your production machines you can count on Argus’s after-sales support. The upgrades are not limited to the software but sometimes involve the hardware as well.

lADPD3lG3ZmeMV7NBQDNCOQ_2276_1280

On-site service is handled quickly and easily thanks to the many offices around the world. Furthermore, a “complete assistance package” can be offered, usually lasting 1 year, which consists of further consultancy and know-how transfer services for a correct and high-quality production process. This package can also be formulated with a full-time on-site technical presence.
Argus’s qualified technicians have years of experience in the photovoltaic sector and can guarantee timely technical feedback both for the machines and for questions regarding the production process and the raw material.

AN IDEAL PARTNER

MINIMIZE THE RISK

Argus is highly appreciated for the absolute availability and reliability of its services before and after the sale, but we are also recognized as an excellent partner for minimizing the risk associated with starting the production of photovoltaic panels. We offer continuous support, flexibility, and speed of response, and thanks to machines that are simple to use but designed to work with the latest technologies on the market you will always be on the crest of the wave.

PRODUCING PHOTOVOLTAIC MODULES HAS JUST BECOME EASIER

CONCRETE SUPPORT

1. COMPLETE TRAINING

TRANSFER OF KNOW-HOW

Argus offers a complete training service to its customers, translating into a complete know-how transfer on the entire production process of photovoltaic panels, working directly with raw materials and machinery.

2. PROJECT MANAGEMENT

WE CREATE AN EFFECTIVE PLAN

Argus has always remained in close contact with the production process and this makes it possible to analyze and develop new configurations of photovoltaic panels with new raw materials and to establish a realistic and specific business plan for each customer.

3. INSTALLATION & START UP

WE HELP YOU GET STARTED

Listening to the customer’s needs, Argus’s qualified staff can advise on how to best optimize the design and structure of the system for a tailor-made project. Both the machinery and the complete lines are supplied with basic training to start producing.

After the first start-up of the machines, you can start with the production of the first module. Argus’s support does not end with the installation of the machinery, customers are followed throughout the production start-up process and will subsequently be followed remotely if necessary.

GET A QUOTE

You can leave your contact information, we will reply you as soon as possible.

GET A QUOTE

You can leave your contact information, we will reply you as soon as possible.

GET A QUOTE

You can leave your contact information, we will reply you as soon as possible.