Trimming&Framing

Argus offer machines with various automation levels for both trimming and framing operations. Dedicated machines efficiently remove excess material, such as encapsulant and back-sheet remnants, left around the panel after lamination. Framing of the panels is achieved through the application of silicone or tape onto aluminum frames, facilitated by suitable equipment.

External Bezel marking machine
Weight 200 kg
Dimensions 80 × 60 × 120 cm
Equipment model

SM-E10

Marking pattern size

≤200mm x 200mm

Marking position

1pc

Marking accuracy at specified position

x: ±2mm; y: ±0.5mm; angle:±0.5°

Module positioning method

Pneumatic cylinder/servo Mechanical positioning

Machine tempo

Machine tempo

Transfer line height

950±30mm

Inflow and outflow of module

A: long in/long out; B: short in/short out

Laser parameters

Pulsed fibre laser; wavelength: 1064nm
Output power: 60W/30W
Frequency range: 1-2000kHz
Cooling method: air-cooled

Camera

HD industrial camera

Equipment size

L×W×H: 800×600×1200mm (without dust extractor)

Equipment weight

0.2 ton (without dust extractor)

On-line bezel marking machine
Weight 1800 kg
Dimensions 290 × 230 × 210 cm
Equipment model

SM-C10

Module version size range

Length: 1400-2550mm, Width: 900-1650mm, Height: 25-50mm

Marking pattern size

≤200mm×200mm

Marking position

3pcs (C-side 1 zone*1; C-side 2 zone*1; B-side 1 zone*1)

Marking accuracy at specified position

x: ±2mm; y: ±0.5mm; angle:±0.5°

Machine tempo

≤22 seconds

Module positioning method

Pneumatic cylinder/servo Mechanical positioning

Transfer line height

950±30mm

Inflow and outflow of components

A: long in-long out; B: short in-long out

Laser parameters

Pulsed fibre laser; wavelength: 1064nm
Output power: 100W/80W
Frequency range: 1-2000kHz
Cooling method: air-cooled

Camera

HD industrial camera

Equipment size

Length x width x height: 2900×2300×2100 mm (without extractor)

Equipment weight

1.8t (without extractor)