Test Sorting Series

Automatic Solar Cell Sorting Machine
Weight 1500 kg
Dimensions 171 × 125 × 170 cm
Equipment model

ST-CT10

Sorting Stalls

12-bit, 24-bit, upgradeable and expandable

Production capacity

2000 cells/hour (single line)

Sample size

182/210 mm Expandable for compatibility with larger cell sizes

Grid lines

9, 10, 12 main grid Upgradeable and expandable

Breakage rate

≤0.5‰

Xenon lamp life

≥100000 (times)

Light intensity non-uniformity

≤±2%

Irradiation instability

≤±2%

Data acquisition

I-V, P-V curves 2000 data acquisition points

Test systems

Windows 7/10 64-bit

Effective power test range

0.1W~15W

Measured voltage

0V~0.8V(resolution 1mV) Range 1/16384

Measured currents

0mA to 2A/20A (resolution 1mA) Range 1/16384

Test condition calibration

Automatic calibration (including manual input compensation device, automatic/manual temperature compensation, automatic light intensity compensation)

Camera type

HD high-speed professional camera

Dimensions of the tester

L×W×H:1600×900×1700mm

External dimensions of the sorter

L x W x H: 1710 x 1250 x 1700mm

Equipment weight

1.5 t

Downbeat Long Pulse Width Module Tester
Dimensions 290 × 180 × 105 cm
Measurable parameters

I-V, P-V curve, short-circuit current Isc, open-circuit voltage Voc, maximum power Pmpp, cell efficiency Eff, fill factor FF, current at maximum power point Impp, voltage at maximum power point Umpp, series resistance Rser, parallel resistance Rshunt, solar cell surface temperature, Iuld (current at fixed point voltage), Puld (power at fixed point voltage). (power at fixed point voltage), where Uld can be set arbitrarily

Measurable module sizes

2600mm×1600mm

Test speed

240 pcs/ h

Flash time

10~200ms, adjustable

Lamp life

>100,000 flashes (10ms flash time)

Irradiance range

200-1200W/m2

Spectral Matching

0.875-1.125 (Grade A+)

Irradiance Instability STI

≤0.25% (Grade A+)

Irradiance Instability LTI

≤1% (Grade A+)

Irradiance inhomogeneity

≤1% (Grade A+)

Spectral range (IEC 60904-9:2020)

300-1200nm

Repeat test accuracy(40 Flashes)

<0.1%

Measurement range

Voltage range: 1v/10v/50v/100v/150v/200v
Current range: 0.25A/1A/5A/10A/20A

Measurement resolution

16bit (Measurement resolution of 0.003%)

Lamp type

Xenon lamp

Operating mode

Single pulse

Working power supply

200~240V, 10A, 50/60HZ, Single-phase

Equipment size

Light box: 2900x1800x1050mm
Electrical cabinet: 800x600x1800mm

Equipment weight

Light Box: 0.5t Electrical cabinet: 0.28t

Insulation withstand voltage tester
Input Characteristics

Voltage:220VAC,±10%,single phase
Frequency:47-63Hz
Fuse:8A/250VAC

DC Withstand Voltage Test

Rated Output:12KV DC
Range:0.0-5.000mA
Resolution:0.01uA
Accuracy:±(2%setting value+2dgts)

Voltage Stability

±(1% setting value +5V)

Test Time

Range:0.5-999.9S
Resolution:0.1S
Accuracy:±(1%setting value+0.05 S)

Insulation Resistance Test

Rated output:3500V DC

Voltage Setting

Range:500 – 3500V DC
Resolution:1V
Accuracy: ±(3% setting value +5V)

Resistance Value

Range:100kΩ-99GΩ
Accuracy:±(3% display value +3dgts)(100kΩ-9.99GΩ)
±(20% display value +3dgts)(10GΩ-99GΩ)

Delay Time Judgment

Range:0.1 – 999.9 S
Resolution:0.1S
Accuracy:±(0.1% display value +0.05 S)

Output Current Setting

Range:10.0~100.0A
Accuracy:±(2% display value +5dgts)

Testing Time

0.5 ~ 999.9 S ,0 continuous testing

Time Accuracy

±(0.1% setting value +0.05S)

LED Solar Simulator
Output beam sizes

210mm x 210mm

Spectral matching class

A+

Time instability class

A+

Uniformity class

A+

Spectral ranges

350nm ~ 1150nm

Output optical power

0.1 ~ 110mW/cm2 (0.1~1.1 SUN) (Adjustable)

Flashing time

0ms ~ 200ms (Electronic cooling)

On-line EL Appearance Inspection Machine
Weight 900 kg
Dimensions 271 × 213 × 132 cm
Equipment model

SELA-V20.D5

Sample applied

crystalline silicon solar module

Valid testing area

2200mm×1200mm

Design capacity

150pcs/hr

Applied

before laminating/after laminating

Resolution ratio

Infrared 500W*12/visible 200Wx12

DC power

Programmable power

Current range

0~15A Continuous adjusted

Voltage range

0~80V Continuous adjusted

Image storage

Manual / automatic scanning bar code, with numbered name as file name to keep.

Motion control unit

Adopts touch screen to communicate with PLC, display the current state and monitor the process in real-time.

Control interface

Chinese and English dialog interface, automatic controlling constant current on&off.

Monitor

4K super definition display on large screen

Software performance

Graphic magnification display function, display tiny features,SQL database store picture

Voltage

AC single phrase 220V±10%,50Hz/60Hz ±10%

Power consumption

3.5 KW

Compressed air

0.6-0.8MPa

Equipment size

2710x2130x1320mm

Equipment weight

900kg

Online EL Tester
Equipment model

ST-EL10

Module size

Length: 1600-2600mm, width: 1000-1600mm

Shooting mode

Direct scanning

Application type

Pre-lamination/Post-lamination

Module loading/unloading method

Module loading/unloading method can be adjusted according to requirements.

Transfer table height

950±30mm

Test cycle

24S / tablet (released before judging)

Camera type

Dedicated HD industrial camera

Effective test area

2600×1400 mm

Resolution

2560×1440

Test accuracy

0.5mm/pixel

Display

4K 50-inch Ultra HD display

Constant current power supply

Programmable power supply

Current range

0~15A continuously adjustable

Voltage range

0 to 80 V , continuously adjustable

Equipment size

2920×2600×1250 mm

Equipment weight

0.8 T

1 2