EQUIPMENTTabber&StringerSTS1200 Single Lines

SGT1300 Full Automatic Single Line

Release time:2018-05-28 Reading times :0 times


SGT1300 full automatic single line Tabber&Stringer

Automatic equipment that soldering the tested solar cells into strings with ribbons, and collecting the solar strings. The equipment adopts various advanced automation technologies such as PLC, Servo, Machenical vision and so on, and realizes automatic processing of solar string discharging from solar cell.


Equipment performance


1. External dimension: 5550mm×1360mm×2100mm;

2.Transmission mode: All Inclusive hemp belt delivery assembly, servo motor positioning;

3. Max Capacity:  1200 pcs/hour for Whole cell or half cell .

4. Breakage rate :<0.1 (Positive A Class)

5. Solar cell dimension:  156mm×156mm compatible with (52mm-156mm156mm cutting sheet welding

6. Thickness of Solar Cell :  0.16-0.3mm

7. Max String Soldering length :  2000mm

8. Ribbon specification:  0.15-0.3mm thickness, 0.7-2mm width (Can customized)

9. Flux adding method :  Spray

10. Soldering method :  IR heating

11. Bus-bar Quantity: 3BB, 4BB, 5BB, 6BB(Fixture switching, can customized)

12. Power supply: 3-phase380V, 50-60Hz(requires firmly grounded);

13. Input compressed air pressure: 0.6-0.8MPa;

14. Input Compressed air flow: 350L/min;

15. Power consumption: 13kW;

16.  Net Weight :  1500KGS


COPYRIGHT @2015 WUHAN SUNIC PHOTOELECTRIC EQUIPMENT MANUFACTURE CO., LTD All RIGHTS RESERVED